Soil Nailing Technique in Tunnel Support
Authors have developed a new pre-lining method (PASS method) in which thin archshell lining is formed ahead of the tunnel face before the excavation to reinforce the ground. This method...

Investigation in 3-D of Stress Distribution in a Circular Tunnel and Vertical Emplacement Holes Due to Thermal and Overburden Loading in Tuff
Thermal stress and displacement analysis using two 3-D finite element models, one having a course mesh and one having a highly detailed mesh are presented. Results are compared to those...

Critical Stresses in Nuclear Waste Container Under Normal Handling Conditions
Critical stresses in the pintle, flat tophead, canister shell, the bottom plate and in the weldment of a high level nuclear waste canister are evaluated under a variety of static and dynamic...

Thin-Walled Finite Element for Curved Multicell Box Girders
The generalized Vlasov's thin-walled beam theory was combined with the finite element technique to develop a new curved thin-walled multicell box girder finite element which can model...

A Finite Difference Approach to the Modelling of Thick Bridge Decks
The finite difference method, although well known as an efficient numerical method, was applied in the past, in the case of slabs, only for the solution of thin slabs. In the present study,...

A Generalized Three Invariants Cap Model and its Numerical Implementation to Study Soil-Foundation Interaction
This paper presents a modified cap model that is capable of characterizing cyclic stress-strain behavior of soils and describing variation of shear strength along various stress paths...

Stress Analysis in Concrete with Cooling Pipes
A substructure method of finite element analysis is adopted in this paper to simulate heat transfer and thermal stresses in a concrete dam. The massive concrete structure is cooled by...

Study of a Computer System for Evaluation of Bearing Wall Stresses in Structural Planning ? Reasoning by Neural Network
This report proposes a reasoning system for bearing shear wall stresses in the ultimate state by using geometrical data of buildings and shear walls at the initial stage of aseismic structural...

Intelligent Optimal CAD (IOCAD) for Arch Dams
The artificial intelligence, optimization methods and CAD techniques are mixed to develop an integrated system for design of arch dams. It includes a knowledge base, a data base, a stress...

A Numerical Procedure to Compute Bearing Capacity of Shallow Foundations
A simple numerical procedure of calculation of bearing capacity of shallow foundation is proposed. This procedure employs the Terzaghi-Prandtl model of general shear failure. In this paper,...

Regional Stress Field Due to Water-Filling at Sanxia Dam
This paper uses the observed stress values to simulate the tectonic stress field in the reservoir. Based on the increment analysis method. we discuss the effects and variations of the...

Nonlinear Trial Load Method of Arch Dams
The trial load method is still an important method for the stress analysis of arch dams at present. However, the trial load method can be used only for the linear elastic analysis of arch...

Time-Dependent Analysis of Nonprismatic Curved PC Box Girder Bridges
The purpose of this paper is to present a step-by-step computer method for predicting the deflection and stress distribution duo to creep and shrinkage of concrete in nonprismatic, curved,...

Rive, Rive-Grown and Burst Probability of Rolled Compressive Concrete Arch Dam
The rive, every step of the rive grown and even burst of arch dam are regarded as sequence random events. Making use of the probability theory and the achievement of elastic, elastic-plastic...

The Use of Geographic Information System Technology to Compare the Environmental Impacts of Human Development on Mobile Bay, Alabama, and Galveston Bay, Texas
Geographic information systems (GIS) can synthesize information rapidly and efficiently from many different sources. GIS-generated maps, which integrate multiple information layers, can...

Waves and Currents Near the Kinburn Spit Extremity
A method of calculation of wave transformation and of currents generated by waves in a surf zone, including a spit extremity is offered. No additional hypothesis on radial stress and wave...

Friction Factors in Coastal Flooding
As the world's coastal zones are being developed and the coastal population increases, coastal flooding, or rather the prediction of its extent and frequency of occurrence, becomes a more...

Computation of Flow Past a Cylinder Mounted on a Flat Plate
The surface shear stress distribution in the vicinity of a circular cylinder - mounted normal to a rigid flat plate - produced by the three-dimensional flow past it, is investigated numerically...

Shape Effect on Bed-Load Transport in Pipes
The nature of part-full flows in pipe sewers produces different channel shapes resulting in non-uniform shear stress distribution on the wetted perimeter. New experimental data were utilized...

Flow Resistance Properties of Flexible Linings
Flow resistance for flexible channel linings is a function of the relative roughness of the lining in accordance with boundary-layer principles. As with vegetation, flexible linings have...

 

 

 

 

Return to search